U.S.A.
Tel: 630-628-8083


SHOP ONLINE


Manufacturing Aids
| Technical Data & SDS |
 

QUALITEK FLUX REMOVAL CLEANERS
35 DEFOAMER
35 Defoamer is a non-ionic surfactant that will reduce foam in most aqueous cleaning operations. It may be added directly to the water wash cycle or sprayed directly onto PCB'S before they enter the wash step.

| TDS | SDS |

STENCIL KLEEN SK 45
Misprint Circuit Board & Stencil Cleaners
SK 45 Stencil cleaner is a Bio Degradable, Non-hazardous stencil cleaner compatible with solder paste as well as SMT epoxy adhesives.

| TDS | SDS |

EVERKLEEN 1005
Everkleen Buffered 1005 Saponifier is designed to convert rosin into a water soluble soap product and is recommended for removing all types of flux residues. Everkleen 1005 contains an anti-foaming agent in a concentrated solution to reduce foaming. Compatible with most PCB surfaces and plastics.

| TDS | SDS |

ACID CLEANER 1300
Acid cleaner 1300 is formulated to ensure the complete residue removal of acid type soldering fluxes and cleaners. The anti-foaming agent contained in the cleaner minimizes foaming and reduces any dragout losses. This cleaner will not attack most plastics such as polycarbonate or polystyrene and will not remove ink markings on components. Cleanliness requirement of MIL-P-28809.

| TDS | SDS |

FINGER CLEANER 3000
Finger Cleaner 3000 is an organic solvent specially formulated to remove rosin redidues from the fingers of conveyorized wave soldering systems and prevent rosin flux from gumming up around the fingers.

| TDS | SDS |

FINGER CLEANER 3001
Finger cleaner 3001 removes organic acid, rosin and no-clean residues from the fingers of the conveyorized wave-soldering systems. This cleaner is considered to be superior to alcohol based solvents in solvency ratings and has a high flash point.

| TDS | SDS |

DESCALER 3173
Descaler 3173 is designed to remove scales or mineral deposits in Aqueous washing systems. For best results, use this product as part of a maintenance program.

| TDS | SDS |

Flux Cleaner Packaging Options
1 Gallon - 5 gallon jugs and 55 gallon drums.

SPECIALTY PRODUCTS
CEASOLDER
Temporary Peelable Rubber Latex Solder Mask

Ceasolder is a high temperature resistant rubber latex. It is used to temporarily mask metal surfaces from molten solder during a wave soldering process. It can be applied directly from the applicator bottle and or dispensed though a pneumatic dispenser.
Ceasolder is availalble in 12 oz. bottles and 1 gallon containers
| TDS | SDS |

WAVE SOLDER OIL (WATER SOLUBLE) 2020
2020 water soluble wave oil is a highly refined synthetic oil hat contains an effective dross inhibiting agent that reduces dross build-up in the solder pot. Wave Oil 2020 is compatible with rosin-based fluxes and all types or organic acid fluxes. Wave Oil 2020 is compatible with leaded and lead free soldering systems.
| TDS | SDS |

Wave Oil Packaging Options:
1 Gallon - 5 gallon jugs and 55 gallon drums.

HAND SOLDERING
REWORK WANDS
Flux filled applicator pens designed for hand soldering rework applications available in no-clean, water-soluble RMA and RA formuations. Compatible leaded and lead free chemistries
Rework wands are sold in boxes of 25 1/3 oz. flux filled pen like applicator
| TDS | SDS |


DELTA TIP TINNER

Delta Tip Tinner consists of a mixture of solder powder and thermally stable oxide reducing compounds and is designed for cleaning and re-tinning soldering iron tips. Available for lead free and leaded assemblies. Box of (10) 1 oz. can

| TDS | SDS |


© qualitek.com All Rights Reserved 2017 - 2018